Products

A Rocker Arm is a device required to transfer the rotating motion imparted by the Camshaft lobe to the reciprocating motion of the Intake, Exhaust Valves and Fuel Pump
A Rocker Arm Assembly consists of several Rocker Arms, a shaft, spacers, springs and supports. These components are pre-assembled into groups in such a way that the system can be mounted directly on the engine head.
Valve Lifters and Cam Follower, in an engine follow the Camshaft Lobe and opens and closes the valves in overhead valve (OHV) engines (the Camshaft within the Cylinder Block).
A Lifter Assembly consists of several lifters, a shaft, spacers and supports. These components are pre-assembled into groups in such a way that the system can be mounted directly on the engine without further assembly work.
The Rocker Arm pushes down on a pivoting ball joint in the center of the Valve Bridge to activate both valves at the same time with just one rocker arm.
The overall performance of the combustion is greatly affected by the quality of the fuel injector components such as high pressure connector, fuel injection body and fuel valves.
We produce shafts both from tube and bars (with deep drilling process) with heat treatment and coating according to the customer specification.
We also provide other key components (e.g. Pin, Roller, HLA, etc.) which are very important for the proper functioning and reliability of the valve train system.
Gnutti Carlo USA is a modern, high volume ductile and grey iron foundry which produces precise castings to ASTM and SAE standards and it is specialized in small ductile iron castings from ounces to 10 pounds.
Ljunghäll group, with its two factories in Sweden and the Czech Republic, is leading in the field of aluminum die-cast. It has presses up to 3500 tons, machining centers and advanced control technologies.
All rights reserved GNUTTI CARLO S.p.A.
N° di iscrizione e ufficio del registro delle imprese 01272680172 - Capitale versato: 7280000 €
Go to top